DIY -Chain Tassel Necklace

tasselnecklacesample2This tassel necklace has long been one of my “go-to” designs for whipping up a quick necklace to showcase my growing collection of rhinestone connectors. The double strand necklace helps to balance the fullness of the tassel fringe. Customize this design by using different styles of chain, mixing metal colors, adding additional chains to the tassel or playing with the length of chains used in the tassel.

Tools Neededmaterials3
Flush wire cutters
2 pairs of chain nose pliers
Beading awl
Ruler

Materials Needed
A rhinestone connector
40 inches of 1.5mm curb chain
5, 4mm jump rings
1, 6mm soldered jump ring
1 lobster clasp

Preparing the PendantMakingtheTasselPendantStep 1: Using wire cutters, cut four lengths of chain that measure 1″ long.

Step 2: Insert the tapered tip of the beading awl into the last link of each chain and use your fingers to force the link to stretch wider by pushing the link onto the wider point of the awl. *This is a great trick to use on any small soldered chain link to stretch out the link and make it large enough to accommodate jump rings.

Step 3: Using 2 pairs of chain nose pliers, attach each chain length to a 4mm jump ring. Close the ring tightly.

Step 4: Attach the jump ring from the previous step to the rhinestone connector with a new jump ring.

Attaching the Necklace

The necklace is made up of two 18″ chains and clasped together with a lobster claw and soldered ring. attachingthenecklaceStep 5: Cut two 18″ lengths of chain.

Step 6: Stretch the end links of both chains using the tapered tip of the beading awl.

Step 7: Attach both chains to the clasp set using a new jump ring. (One side will attach to the lobster claw and one side will attach to the soldered ring.)

Step 8: Using chain nose pliers, connect the two chains to the top ring of the rhinestone component with a new jump ring.

 

WE LOVE READING YOUR COMMENTS!! Comment on this post for your chance to win a kit of materials to make your own. Winner will be chosen randomly and announced on August 5th!

 

About Lisa Claxton
Beads... what can I say, they are and have always taken over my life. Every room in the house has them and yet I crave more.

3 Responses to DIY -Chain Tassel Necklace

  1. Kay says:

    This is great. I love chain and I love tassels. I’d never thought about how to make chain tassels. And the idea of using the awl to enlarge the link on the chain is helpful. What a cute idea. Thanks.

    Like

  2. beadlove says:

    What a great idea! Thank you for the tutorial.

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s

%d bloggers like this: