DIY: Summer Chain Stack Necklace

ChainStackBaublesandBeadsSummertime jewelry ensembles require simplicity both in assembly and wear. Designs that feature chain provide the best of both worlds. We love this simple stacked necklace design that incorporates colorful glass beads with charms & chain. Make the design your own my using mixed metals, changing up the chain styles, using different lengths of chains and charms to set a mood.

materialsChainStackBaublesAndBeadsMaterials Required

Assembling the Three Chain Strands

Baubles & Beads Summer Chain Stack Necklace Step 1Step 1: : Cut the cable chain to a 18‚ÄĚ length (or longer if desired). This will be the shortest strand. If needed attach a jump ring to the charm so that when it is strung onto the chain the charm faces forward.

Baubles & Beads Summer StackStep 2: On one end of the snake chain use chain nose pliers to fold each side of the fold over crimp securely against the chain. For best results, fold one side down snugly then fold the second side down over the first side. If any chain protrudes at the loop end simply cut off the excess chain with wire cutters.

TIP: Securing one end of the chain before stringing on the seed beads will ensure the beads don’t accidentally fall off the chain later. ūüôā

Baubles And Beads Summer StackStep 3: Cut the snake chain 2‚ÄĚ longer than the first chain. Embellish the chain by adding color with size 8/0 seed beads. The amount of beads you use and the pattern is up to you. For reference we strung on about 6 inches of beads. Secure a fold over crimp onto the unfinished side of the chain. This will keep the beads from falling off the chain during final assemble.

TIP: Traditionally when making a multi-strand graduated length necklace each strand should vary in length by 2 inches.

baubles and beads summer stackStep 4: Cut the rolo chain to measure 2‚ÄĚ longer that the snake chain. This is the longest strand. If needed, attach a jump ring to the charm so that when it is strung onto the chain the pendant faces forward. String on the final charm.

Attaching the Chains Together

BaublesAndBeads.com Summer Stack Step 5Step 5: Feed one end of each chain onto a jump ring and close the ring with chain nose pliers. Repeat this step on the opposite end of the chains making certain that the chains do not twist around each other in the process.

TIP: Soldered chain links can be stretched larger by inserting a tapered beading awl into the end link and gently forcing the awl into the link. By stretching the link in this manner the jewelry designer does not have to compromise durability when using small linked chain.

Step 6: Attach a swivel lobster clasp to one of the rings used to connect the chains together. Swivel style clasps help keep multiple strands from twisting during wear. On the opposite side of the necklace attach one additional ring and close it tightly.

TIP: Using additional rings to attach the clasp keeps the chains out of the way when putting on or taking off the necklace.

BaublesAndBeads.com Chain Stack Brass

Let us know what you think by commenting below. On July 18th we will randomly select a winner from the comment list to win the Summer Chain Stack Necklace in Silver! Good luck and happy summer beading!! (UPDATE: Congrats to Elaine who rocked the party and won herself one of the samples.)

DIY: Beads And Leather Wrap Bracelet

BeadsAndLeatherBraceletTutorialMaterials Needed:
40 inches of 1.5mm or 2mm leather cord
1 card of size #2 nylon thread with a needle attached
1 strand of 3mm hex-cut metal beads
1 shank style button that measures 15mm-30mm

Tools Needed:
Light duty flush cutters
1-2 Big eye needles, 2 ¬ľ‚ÄĚ in length
G-S Cement glue
2 clamps (optional)
A wooden work tray (optional)

Chan Luu-style bracelets seem to allure all of us. Who can resist a bracelet that wraps around your wrist multiple times displaying your favorite beads. I hope this tutorial will get you started with a new wrap bracelet obsession. Be sure to check out the very end of the tutorial for great tips on changing up the beads, # of wraps & more!

Attaching the Clasp & Preparing the Bracelet for Some Bead Action

Attach the Button www.baublesandbeads.comStep 1: Center the button on the leather cord and tie an overhand knot to hold it in place. Make sure the button can move freely on the leather loop.

Step #2 Remove the entire length of the thread from the card. String the big-eye needle onto the end of the thread that does not already have a needle attached.

TraySetUp www.baublesandbeads.comOptional: Some people prefer working this bracelet up with the use of clamps and a wooden tray. Fasten the button to one end of the tray with a clamp. Then secure the leather cords to the opposite end of the tray with another clamp, leaving a bit of space between the two cords for easy access when adding beads.

Stitching the Beads to the Leather

Step2* The photos display two colors of thread to make each step of the bracelet a bit easier to understand. In real life we are using just one color of thread.)

Step #3: Center a bead on the long length thread and position the bead in between the two leather cords, against the button, with the thread resting across the front of the leather cord.

Step #4: Bring one side of the thread (black thread in picture) around the outside edge of the leather and up thru the center, between the two leather cords.

Step #5: Using the needle, feed the same thread thru the bead hole and crossing over the front of the leather on the opposite side of the bracelet.

Step #6: Repeat Step 4 & Step 5 with the other thread (purple thread in picture). Pull both threads to tighten the stitch.

Step4 Wrap Bracelet www.baublesandbeads.comStep #7: Bring one side of the thread around the outside edge of the leather, up thru the center, and resting in front of the leather on the opposite side of the bracelet.

Step #8: String a bead on the same thread and position the bead in the space between the two pieces of leather.

Step #9: Feed the opposite thread around the outside of the leather, thru the bead hole, and crossing over the front of the leather on the opposite side of the bracelet.

Step #10: Pull both threads to tighten the stitch.

step5 Wrap Bracelet www.baublesandbeads.comStep #11: Continue securing beads in place by repeating Step 7-Step 10 until the bracelet wraps around your wrist two times. For an ideal fit make the bracelet long enough that the starting bead and the ending bead touch when wrapped snugly around your wrist.

Securing the Threads & Finishing the Clasp

The threads are secured in place by tying a surgeons knot with the two threads. If the bead hole is big enough the knot can be hidden inside the hole (a good reason to use large hole beads at the start and finish of the bracelet). Small hole beads require an alternate finishing technique, read on for more details.

Finishing Wrap Bracelet www.baublesandbeads.comStep #12: Flip the bracelet over and feed one of the threads back through the bead. (black thread in picture)

Step #13: Wrap thread from the previous step around the needle of the other thread two or three times.

Step #14: Feed the needle thru the bead and slowly pull the thread through the bead.¬† The ‚Äúwraps‚ÄĚ around the other thread will tighten into a knot that will be pulled inside the hole of the bead. If the bead hole is large enough repeat Step 13 & Step 14 again.

TIP: Beads with small holes will not accommodate multiple threads to be passed through with this technique. An alternative way to finish this bracelet is to simply knot the two threads together on the outside of the bead. The finishing knot will be exposed but can be worn on the inside of the bracelet. Most people prefer this method as it is super (duper) easy and for the most part the maker is the only one who notices the exposed thread.

Step #15: Glue the knot and allow it to dry. When the glue is dry (yes, wait for it to dry) cut the threads.

Loop Closeure of Wrap Bracelet www.baublesandbeads.comStep #16: Tie the two sides of the leather into an overhand knot positioned the knot close to the final bead stitch.

Step #17: Leaving enough room to accommodate the size of the button on the opposite end, tie a second overhand knot with the leather cords. Check to make certain the button fits into the loop before tightening the loop.

Step #18: Cut the ends of the leather approximate ¬Ĺ‚ÄĚ from the knot. Or string a couple embellishment beads onto the individual leather cords and make an additional knot to keep them in place.

TIP: Light-duty flush cutters are an excellent way to easily cut through heavy cording materials while providing for a clean cut. These light-duty cutters are traditionally used to cut through the silk cord through between knotted pearls. The flat side of the cutter provides protection from damaging the bead while the blades cut cleanly through the fibers. They are also excellent for cutting soft wire up to 18 gauge.

Beads And Leather Wrap BraceletTips & Tricks

Cutting Leather Cord for Additional Wraps: Additional wraps require using a longer length of leather cord, thread, and additional beads. A general guideline to cutting the appropriate leather length is as follows: 1 wrap: 24 inches, 2 wraps: 40 inches, each additional wrap will require an addition 12 inches of leather. Remember we all have different sized wrists; play it safe by using a bit more leather than required.

Using Small Hole Beads: Small hole beads are exciting and it can be hard to limit yourself to beads with large holes only. When selecting smaller hole beads a thinner thread is required. I like Superlon or Nymo Size D for their excellent color selection. You may also need to use a finer needle. We like to use a size #10 needle for Nymo and Superlon.

Adding a New Thread: When making bracelets with more than two wraps additional thread will be required to complete the project. If you are using large hole beads simply knot off the old threads, glue & cut. Add the new thread by feeding one end through the last bead stitched, centering the thread, and resume beading like nothing happened.

(Winner has been notified and Kathy was one lucky beader! Thanks everyone!)Win a kit of supplies to make the wrap bracelet pictured at the top of this DIY. Simply pen a comment below for your chance to win. Winner will be notified January 5th, 2016. Good Luck!!!

January’s Birthstone -Garnet

January’s Birthstone: Garnet
Zodiac stone
Capricorn December 22-January 20: Garnet
Aquarius January 21- February 19: Amethyst
The 2nd Anniversary Stone

Almadine garnet beads

Almadine garnet beads

January is the only month with no alternate birthstone, but Garnet more than makes up for this with a wide color spectrum of stones. There are 7 main types of Garnet, almandine (deep red to purple), andradite (red, yellow, brown, green or black), demantoid (green to yellowish green or blue green), grossularite (green, brown, red, yellow), pyrope (deep red to black), spessarite (orange yellow), uvarovite (bright green). Garnets posses nearly identical physical properties despite all the differences in color, garnets are neosilicates, with a differing mineral producing each color. Relatively high on the Mohs scale, 6.5-7.5 garnets are well suited to faceting and setting in jewelry. The harder stones are also used as commercial abrasives, from sandpaper to use in highly compressed air that cuts steel. Widely mined around the world many locations are known for particular colors or types. Australia, India, Madagascar, Namibia, Italy, Iran, United States, are all current commercial producers. Russia, once a strong producer of demantoid garnets, a favorite of the designer Faberge now only produces a very small amount. Eastern Europe was an early source, with much of the cutting and shaping done in Bohemia. Garnets cut for gemstones are not usually treated, although it is common to see dyed garnet material used for beads.

Green grossularite garnets

Green grossularite garnets

Garnet gets its name from ‚Äėgranataum‚Äô meaning seed, refers to the similarity to a pomegrante seed. Ancient Romans used garnet in inlay work. Garnets are reputed to be the stones of truth, friendship, faithfulness, commitment, and insight. Given as a friendship gift and worn into battle by soldiers, garnets are especially good for problems with the blood, lungs, preventing and curing infection. The red color garnet is a symbol of love and enhances sensuality.

Spessarite or Hessanite garnets in an orange yellow color.

Spessarite or Hessonite garnets in an orange yellow color.

Use these garnets in your designs-
Depending on the color chosen, garnets can be used in many different designs. Red garnets mixed with gold are an especially rich mixture, adding black garnets, spinel or onyx would increase the dramatic flare. Green garnets are also attractive mixed with gold or add a sparkly quality to other earthy green stones. Rich orange or yellow garnets would be accented with silver, or mixed with warm tones of pearls, amber or natural mother of pearl.

DIY -Gold Shield Earrings

This sunday morning’s D.I.Y project is brought to you by yet another lovely bead shop babe!

To make these earrings you will need a hole punch, chainnose pliers, gold plate jump rings, earwires and 18 dimensional cube charms

Step 1: punch holes in the gold shield charms

 

step 2: attach together using gold plated jump rings

Step 3: add earwires!

Current Obsession — Marquise Rings

Here at Baubles and Beads we tend to get a little fixated on things.  Right now its our vermeil marquise rings.

Here are some examples of earrings we have made using them!

Inspired? Show us what you have made using the marquise rings!
and check out the¬†ear¬†wires we used in these earrings here¬†‚̧ shop Girl

DIY -Wire Lace Necklace

For this Sunday I thought I would take one of the stores popular samples and break down how it was made.  This elegant necklace is really simple to make once you have seen the steps it takes to do it.

Materials Needed: 

 Wire Lace in Brass,  Gold pyrite briolettes (and briolette shaped stone will work),   Gold filled crimp ends ,  Gold ,   Gold plated clasp,   Gold plated jump rings,   Hypo cement glue,  Chainnose plyers, Thread snips

 

Step 1:  Cut two, one yard lengths of the wire lace and tie the two peices together at one end.  You want to leave about a 3 inch tail from the knot. 

Step 2:  thread one of the pyrite beads on t0 one of the strands of wire lace.

Step 3:  Bringing the two threads of wirelace together, tie and overhand knot about half an inch from your first knot.

Step 5: When you have finished knotting on the pyrite beads to the two strands, hold the ends of both strands together (where you tied your first knot) and tie another overhand knot that ties the two strands together.   Glue the knot with hypo cement.

 

Step 6: Slide the crimp end on over the knot while the glue is still tacky and smash it flat with chainnose pliers.   Trim the tails of the thread off.  Repeat on the other end of you wirelace strands. 

  

Step 7: Attach chain and clasp in the back to acheive your desired lengh. 

DIY -Turquoise & Wasp Leather Cuff

Turquoise + Wasp Leather Cuff

  

This simple to make cuff bracelet will make the¬†perfect accessory with a summer dress or jeans and a tee shirt.¬†¬† (can you tell I’m fantasizing about summer time already?)

To get started you will need:
Leather Blank (Baubles and Beads has these in store only, call for ordering info)
4mm round beads, I used turquoise beads here, but any material would work
C-Lon Thread in Gold
Brass Button, the button I chose has a shank on the back.  One with 2 or four holes would also work
Brass Wasp

Tools:
Hole Punch

Thread Snips

Awl

Super Glue

1.  Using the hole punch, punch holes on the edge of the leather about a centimeter apart. Be careful not to get too close to the edge!

2.  Cut approx. 1 yard of C-lon thread.  I like to put super glue on one inch of the thread to make it easier to pull through the leather (cheater needle!)

3.  Tie the C-lon in a square knot in the first hole in the leather.  Dab with super glue and cut the tail off.

*if your holes are too tight to pull the thread through easily then you can use your awl to widen them*

4.  Using a whip stitch, sew through the holes in the leather, sliding on a bead each time your thread is on the top on the leather.

         

Repeat until both sides of the leather are beaded.

5.  Now its time to add the button!  Using the hole punch, punch two holes on one end of the leather.  *be sure to check the sizing on your wrist before you decide where to place the button*

6.  Using the C-Lon thread, sew through the leather and button shank several times and then tie a knot on the back of the leather.  Dab the knot with super glue and trim tails.

7.  On the other side of the leather strip cut a button hole.  Use the hole punch to start your hole, then using the thread snips open the hole up just as large as it needs to be to fit over the button.

   

8.  To add the wasp, use hole punch and punch two holes, one in each wing.

9.  Place the wasp in the middle of the leather cuff and use an awl to mark where you will need to punch holes.  Then remove the wasp and punch out the holes.

   

¬†¬† ¬†10.¬† Using C-lon, make a stitch through each hole and around the wasp’s body, tying knots in the back and securing with super glue before trimming extra thread.

 

done!!

%d bloggers like this: