DIY: Spider Pendant

baublesandbeads-spiderpendantsI love how the spiders begin to take over my garden with their webs every October. They serve to remind me that Halloween is just around the corner. Luckily my daughter has a good sense of humor and we often try to “scare” each other with fake spiders around the house. She was delighted when I brought home a couple of these beaded versions. Luckily, I am excited to make many more!!

Preparing the Wire Legs and Building the Body

baublesandbeadsspiderstep1Step 1: Cut 4 pieces of wire measuring 5 inches in length. Wrap the center point of each wire around a scrap piece of wire, tightly. This step will make a loop in the center of the wire so that it can later be strung onto the body of the spider.baublesandbeadsspiderstep2Step 2: Feed the following pattern of beads/wire onto the headpin: one 12mm bead, all four wire legs, one 10mm bead.

baublesandbeadsspiderstep3Step 3: Using round nose pliers, make a simple loop above the 10mm bead. If this technique is new to you we have a tutorial for that too, it will change you life (at least where earrings are concerned.)

TIP: If you are using coated wire and your pliers nick the finish simply use a Sharpie marker to hide the blemish.

For a Spider, It Is All About the Legs

The front and back legs of the spider are slightly shorter that the four middle legs. baublesandbeadsspiderstep4Step 4: String the following pattern of beads onto a front leg wire: 2 seed beads, 1 bugle bead, 2 seed beads, 1 bugle bead, 2 seed beads, 1 bugle bead, 2 seed beads.

baublesandbeadsspiderstep4-2Step 5: Cut the wire 1/4″ from the last bead. Secure the beads in place by turning the wire under, into a loop, with round nose pliers.

baublesandbeadsspiderstep4allStep 6: Repeat Step 4-5 on all four front and back legs.

baublesandbeadsspiderstep5Step 7: String the following pattern of beads onto a middle leg wire: 2 seed beads, 1 bugle bead, 1 seed bead, 1 3mm bead, 1 seed bead, 1 bugle bead, 2 seed beads, 1 bugle bead, 2 seed beads.

Step 8: Cut the wire 1/4″ from the last bead. Secure the beads in place by turning the wire under, into a loop, with round nose pliers.

Step 9: Repeat Step 7-8 on all four middle legs.

baublesandbeadsspiderfrontStep 10: Using your fingers shape the legs slightly to make the spider look more realistic.

And bam! you now have your first spider pendant. My favorite chain for this color combination is a black/gold cable chain or keep it simple and string this spider on a black leather cord.

Show off pics of your beaded spiders on our Facebook page. Our staff will choose a favorite and send that lucky winner a $25 BaublesAndBeads.com gift card! We will choose the winner on October 31st 2016. Good luck.

DIY -Chain Tassel Necklace

tasselnecklacesample2This tassel necklace has long been one of my “go-to” designs for whipping up a quick necklace to showcase my growing collection of rhinestone connectors. The double strand necklace helps to balance the fullness of the tassel fringe. Customize this design by using different styles of chain, mixing metal colors, adding additional chains to the tassel or playing with the length of chains used in the tassel.

Tools Neededmaterials3
Flush wire cutters
2 pairs of chain nose pliers
Beading awl
Ruler

Materials Needed
A rhinestone connector
40 inches of 1.5mm curb chain
5, 4mm jump rings
1, 6mm soldered jump ring
1 lobster clasp

Preparing the PendantMakingtheTasselPendantStep 1: Using wire cutters, cut four lengths of chain that measure 1″ long.

Step 2: Insert the tapered tip of the beading awl into the last link of each chain and use your fingers to force the link to stretch wider by pushing the link onto the wider point of the awl. *This is a great trick to use on any small soldered chain link to stretch out the link and make it large enough to accommodate jump rings.

Step 3: Using 2 pairs of chain nose pliers, attach each chain length to a 4mm jump ring. Close the ring tightly.

Step 4: Attach the jump ring from the previous step to the rhinestone connector with a new jump ring.

Attaching the Necklace

The necklace is made up of two 18″ chains and clasped together with a lobster claw and soldered ring. attachingthenecklaceStep 5: Cut two 18″ lengths of chain.

Step 6: Stretch the end links of both chains using the tapered tip of the beading awl.

Step 7: Attach both chains to the clasp set using a new jump ring. (One side will attach to the lobster claw and one side will attach to the soldered ring.)

Step 8: Using chain nose pliers, connect the two chains to the top ring of the rhinestone component with a new jump ring.

 

WE LOVE READING YOUR COMMENTS!! Comment on this post for your chance to win a kit of materials to make your own. Winner will be chosen randomly and announced on August 5th!

 

DIY -Draped Fringe Pendant

drapechainpendantIn celebration of Baubles & Beads great July chain sale, I am excited to offer you another chain based project.  This one is super easy and super customizable.  Five lengths of chain are used to create a draped fringe around a centerpiece bead. The chain lengths can be made longer or shorter as needed to accommodate any size bead. I love how the spiral rope chain looks but with so many chains available, you can substitute just about any small link chain.

Tools Neededmaterials

Flush Wire Cutters
Chain Nose Pliers
Round Nose Pliers
Ruler

Materials Needed
2 1/2 feet of spiral rope chain -1.6mm
1 centerpiece bead -10mm (I used these)
1 eyepin -2″
2 jump rings -4mm or 6mm (21ga)
10 daisy spacer beads -3mm
1 clasp set -12mm or smaller

 

Stringing the Pendant Pattern

Step 1: Cut one piece of chain in each of the following lengths: 1″, 1.5″, 2″, 2.5″. These four pieces of chain will make up the fringe that surrounds the bottom of the bead.step02-03loopyfringe

Step 2: String the following pattern of beads onto the eyepin: 1 spacer bead, the 2.5” length of chain, 1 spacer, the 2” length of chain, 1 spacer bead, the 1.5” length of chain, 1 spacer bead, the 1” length of chain, 1 spacer bead, and the 10mm bead.

Step 3: On the opposite side of the 10mm bead, string: 1 spacer bead and the opposite end of the 1” chain. You will need to push the bead and the 1″ chain length closer to the open end of the pin in order to be able to feed the small chain on.

Step 4: Continue feeding the opposite end of the chains onto the pin, in order of length, with a new spacer bead strung in between each chain. After the opposite end of each chain has been fed on, finish the segment by stringing on a final spacer bead.

Making a Loop on the Opposite Side of the Eyepinstep04-06loopyfringeStep 1: Using the tip of the chain nose pliers, grab the wire against the last spacer bead strung. Bend the wire  against the edge of the tool making a 90 degree angle. (Using the tool this way will leave a small amount of space on the eyepin wire to allow the chains room to dangle freely.)

Step 2: Using flush wire cutters, cut the wire so that it measures about 1 centimeter from the bend.

Step 3: Using round nose pliers, gently shape the wire into a closed loop.

For an in-depth look at how to make simple loops, check out our archives on “How To Make a Simple Wire Loop”

Putting it All Togetherstep07-08loopyfringeStep 1: Cut two 8 inch lengths of chain.

Step 2: Using chain nose pliers, open one of the loops on the eyepin and attach a length of chain. Repeat on the opposite side.

Step 3: Attach each side of the clasp set to one of the opposite end of the chain with a jump ring.

WE LOVE READING YOUR COMMENTS!! Comment on this post for your chance to win a kit of materials to make your own. Winner will be chosen randomly and announced on July 31st!

Congrats go out to Sue for being the lucky winner of a kit of materials to make her own necklace using this tutorial.

%d bloggers like this: