DIY: Art Deco Swing Earrings

Staying in the summertime groove of lightweight, slinky and sparkly is a must for jewelry projects this season. These earrings have so many possibilities that I couldn’t limit myself to only providing the pattern for one design, I also included the pattern for a pair that uses rhinestone chain. They are so simple (okay, one step is kinda frustrating) you will be inspired to customize the pattern yourself.

I’d love to see what you make from this DIY. Post your pics on Baubles & Beads Facebook page by August 2017 and I’ll hook you up with a coupon code to help you purchase more supplies.

Materials Needed (for the gold pair)MaterialsArtDeco-BaublesAndBeads

Preparing the Chain

Counting ball links is the least wasteful method of cutting the chain. It’s not so great for those of us with lacking 20/20 vision. Keep this technique chill by starting with each chain the longest length and then cut the rest down to size.

Step1ArtDecoSwing-BaublesAndBeadsStep 1: Cut the following number of chains into 1 3/4″ lengths: 8 black pieces, 4 silver pieces, 6 gold pieces. Repeat this step for the second earring and set them aside.

Securing the Chains into the End Cap

Step2ArtDecoSwing-BaublesAndBeadsStep 2: Feed one ball link of each chain into the slot of the end bar in the following pattern: 2 black, 2 gold, 2 silver, 2 black, 2 gold, 2 black, 2 silver, 2 gold, 2 black. Repeat this step for the other earring and set aside.

Step3ArtDecoSwing-BaublesAndBeadsStep 3: Using chain nose pliers gently fold the open end of the end cap closed while making sure no chains fall out of the cap (this is the tricky part). I usually use the tool to get the end to fold downward and then secure it tight by pushing the end against the edge of a table or hard surface. Make certain the end is closed enough that the chains can’t fall out. Repeat this step on the other earring and start to get excited.

Cutting the Fringe Pattern

It is inevitable that even though I measured each length of chain they are are different lengths. I like to count the ball links of center two chains so that I am certain the two earrings are a match. (I will also admit I counted them, all 32, by taking a picture of the earrings and zooming in on my phone so I could easily see the ball links.) I have made a lot of these earrings and every time I cut the fringe a bit different, usually because I make a mistake.

Step4ArtDecoSwing-BaublesAndBeads.jpgStep 4: Each length of fringe decreases by two links from the center two chains. Cut each chain, one by one, starting from the center and working toward the ends. If you make a mistake simply repeat it on the other side and call it a custom design. Repeat the same pattern on the opposite earring.

Attach the Ear Wire

Step5-ArtDecoSwing-BaublesAndBeadsStep 5: Using chain nose pliers, attach the open loop of your ear wire to the loop on the end bar.

Designer’s Musing: If you are a keen tutorial reader you may have noticed my picture of materials includes a lever back ear wire while my list of materials uses a post. When I connected the lever back to the end bar I discovered the loop on the lever back was too small to allow the earring to dangle freely so I opted for the post earring instead. To keep my ears from reacting to the metal I always use precious metal ear wires on my designs even if the other materials are base metal, unless of course they are for someone who always loses the earrings I give her 🙂

But Wait There’s More…

When I decided to write this tutorial I had a hard time decided which earring to make. Why not both? Check out this hottie… (recipe ingredients are included below). Same technique just different chains.

Art Deco Sparkle Earrings

ArtDecoRhinestone-BaublesAndBeadsMaterials Needed (silver pair)

Win one of the samples by commen ting on this post before May 29th, 2017. We will choose one lucky winner and contact you for shipping details, good luck, & most importantly enjoy!

%d bloggers like this: